manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 286

286

|

Interfaces

www.dell.com | support.dell.com

UDP Broadcast

The user datagram protocol (UDP) broadcast feature is a software-based method to forward low 
throughput (not to exceed 200 pps) IP/UDP broadcast traffic arriving on a physical or VLAN interface. 

Important Points to Remember

•

Routing information protocol (RIP) is not supported with the UDP broadcast feature.

•

If this feature is configured on an interface using 

ip udp-helper udp-port

, the 

ip 

directed-broadcast

 command becomes ineffective on that interface.

•

The existing command 

show interface 

has been modified to display the configured broadcast 

address.

The commands for UDP Broadcast are:

•

debug ip udp-helper

•

ip udp-broadcast-address

•

ip udp-helper udp-port

•

show ip udp-helper

debug ip udp-helper 

Enable UDP debug and display the debug information on a console.

Syntax

debug ip udp-helper 

To disable debug information, use the 

no debug ip udp-helper 

command.

Defaults

Debug disabled

Command Modes

EXEC

EXEC Privilege

Example

Figure 14-45.  Debug Output Command Example 

Command

History

Related

Commands

FTOS#debug ip udp-helper
UDP helper debugging is on

01:20:22: Pkt rcvd on TenGig 5/0 with IP DA (0xffffffff) will be sent on TenGig 5/1 
TenGig 5/2 Vlan 3

01:44:54: Pkt rcvd on TenGig 7/0 is handed over for DHCP processing.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

ip udp-broadcast-address

Configures a UDP IP address for broadcast

ip udp-helper udp-port

Enables the UDP broadcast feature on an interface.

show ip udp-helper

Displays the configured UDP helper(s) on all interfaces.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands