Dell Force10 MXL Blade Reference Manual Download Page 558

Page: 558 / 732

558

Security

www.dell.com | support.dell.com

Command

History

ip ssh hostbased-authentication

Enable hostbased-authentication for the SSHv2 server.

Syntax

ip ssh hostbased-authentication enable

To disable hostbased-authentication for SSHv2 server, use the

no ip ssh hostbased-authentication

enable

command.

Parameters

Defaults

Disable by default

Command Modes

CONFIGURATION

Command

History

Usage

Information

If you enable this command, clients can login without a password prompt. This provides two levels of
authentication:

•

rhost-authentication is done with the file specified in the

ip ssh rhostfile

command

•

checking client host-keys is done with the file specified in the

ip ssh pub-key-file

command

If you execute

no ip ssh rsa-authentication enable

, host-based authentication is disabled.

Related

Commands

ip ssh key-size

Configure the size of the server-generated RSA SSHv1 key.

Syntax

ip ssh key-size

512-869

Parameters

Defaults

Key size 768

Command Modes

CONFIGURATION

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

enable

Enter the keyword

enable

to enable hostbased-authentication for SSHv2 server.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Note:

Administrators must specify the two files (rhosts and pub-key-file) to configure

host-based authentication.

ip ssh pub-key-file

Public keys of trusted hosts from a file.

ip ssh rhostsfile

Trusted hosts and users for rhost authentication.

512-869

Enter the key-size number for the server-generated RSA SSHv1 key.

Range: 512 to 869

Default: 768

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands

Dell Force10 MXL Blade, Reference Manual

Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands