Dell Force10 MXL Blade Reference Manual Download

Page: 494 / 732

494

Routing Information Protocol (RIP)

www.dell.com | support.dell.com

default-metric

Change the default metric for routes. Use this command with the

redistribute

command to ensure

that all redistributed routes use the same metric value.

Syntax

default-metric

number

To return the default metric to the original values, use the

no default-metric

command.

Parameters

Default

Command Modes

ROUTER RIP

Command

History

Usage

Information

This command ensures that route information being redistributed is converted to the same metric value.

Commands

description

Enter a description of the RIP routing protocol

Syntax

description

{

description

}

To remove the description, use the

no description

{

description

} command.

Parameters

Defaults

none

Command Modes

ROUTER RIP

Command

History

Commands

number

Specify a number.

Range: 1 to 16.

The default is 1.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

redistribute

Allows you to redistribute routes learned by other methods.

description

Enter a description to identify the RIP protocol (80 characters maximum).

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

router rip

Enters ROUTER mode on the switch.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands

Dell Force10 MXL Blade, Reference Manual

Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands