manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 357

Link Layer Discovery Protocol (LLDP) |

357

advertise management-tlv 

Advertise management TLVs (Type, Length, Value).

Syntax

advertise management -tlv 

{

system-capabilities

 | 

system-description | system-name

} 

To remove advertised management TLVs, use the 

no advertise management -tlv 

{

system-capabilities

 

| 

system-description | system-name

} command.

Parameters

 

Defaults

none

Command Modes

CONFIGURATION (conf-lldp)

Command

History

Usage

Information

All three command options — 

system-capabilities

, 

system-description, 

and

 system-name

 —-can be 

invoked individually or together, in any sequence.

clear lldp counters 

Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical 
interface.

Syntax

clear lldp counters 

interface

Parameters

 

Defaults

none

Command Modes

EXEC Privilege

Command

History

clear lldp neighbors 

Clear LLDP neighbor information for all interfaces or a specific interfaces.

Syntax

clear lldp neighbors 

{

interface

} 

system-capabilities

Enter the keyword 

system-capabilities 

to advertise the system capabilities 

TLVs.

system-description

Enter the keyword 

system-description 

to advertise the system description 

TLVs.

system-name

Enter the keyword 

system-description 

to advertise the system description 

TLVs.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

interface

Enter the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword 

tenGigabitEthernet 

followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the 

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands