Dell Force10 MXL Blade Reference Manual Download Page 128

Page: 128 / 732

128

Access Control Lists (ACL)

www.dell.com | support.dell.com

Command

History

Default

Clears “hit” counters for all prefix lists unless a prefix list is specified.

Related

Commands

deny

Configure a filter to drop packets meeting the criteria specified.

Syntax

deny

ip-prefix

[

min-prefix-length

] [

max-prefix-length

]

Parameters

Defaults

Not configured.

Command Modes

PREFIX-LIST

Command

History

Usage

Information

Sequence numbers for this filter are automatically assigned starting at sequence number 5.

If you do not use the options

, only packets with an exact match to the prefix are filtered.

Related

Commands

ip prefix-list

Enter PREFIX-LIST mode and configure a prefix list.

Syntax

ip prefix-list

prefix-name

Parameters

Command Modes

CONFIGURATION

Command

History

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

ip prefix-list

Configures a prefix list.

ip-prefix

Specify an IP prefix in the network/length format. For example, 35.0.0.0/
8 means match the first 8 bits of address 35.0.0.0.

min-prefix-length

(OPTIONAL) Enter the keyword

followed by the minimum prefix

length, which is a number from zero (0) to 32.

max-prefix-length

(OPTIONAL) Enter the keyword

followed by the maximum prefix

length, which is a number from zero (0) to 32.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

permit

Configures a filter to pass packets.

seq

Configures a drop or permit filter with a specified sequence number.

prefix-name

Enter a string up to 16 characters long as the name of the prefix list, up to 140 characters
long.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands

Dell Force10 MXL Blade, Reference Manual

Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands