manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 254

254

|

Interfaces

www.dell.com | support.dell.com

negotiation auto 

Enable auto-negotiation on an interface. 

Syntax

negotiation auto

 

To disable auto-negotiation, enter 

no negotiation auto

.

Defaults

Enabled

Command Modes

INTERFACE

Command

History

Usage

Information

The 

no negotiation auto 

command is only available if you first manually set the speed of a port to 

10Mbits or 100Mbits. 

The 

negotiation auto

 command provides a 

mode

 option for configuring an individual port to 

forced-master/forced slave once auto-negotiation is enabled 

Figure 14-21.  negotiation auto Master/Slave Example 

If the 

mode

 option is not used, the default setting is slave. If you do not configure 

forced-master

 or 

forced slave

 on a port, the port negotiates to either a master or a slave state. Port status is one of the 

following:

•

Forced-master

•

Force-slave

•

Master

•

Slave

•

Auto-neg Error—typically indicates that both ends of the node are configured with forced-master 

or forced-slave.

You can display master/slave settings with the 

show interfaces

 command.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Caution: 

Ensure that one end of your node is configured as forced-master and one is 

configured as forced-slave. If both are configured the same (that is forced-master or 
forced-slave), the show interfaces command will flap between an auto-neg-error and 
forced-master/slave states.

FTOS(conf)# int tengig 0/0
FTOS(conf-if)#neg auto
FTOS(conf-if-autoneg)# ?

end                     Exit from configuration mode            
exit                    Exit from autoneg configuration mode    

mode                    Specify autoneg mode  

                  

no                      Negate a command or set its defaults    
show                    Show autoneg configuration information  
FTOS(conf-if-autoneg)#

mode ?

forced-master           Force port to master mode               
forced-slave            Force port to slave mode 
FTOS(conf-if-autoneg)#

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands