Dell Force10 MXL Blade Reference Manual Download

Page: 493 / 732

Routing Information Protocol (RIP) | 493

Parameters

Command Modes

EXEC Privilege

Command

History

default-information originate

Generate a default route for the RIP traffic.

Syntax

default-information originate

[

always

] [

metric

metric-value

] [

route-map

map-name

]

To return to the default values, use the

no default-information originate

command.

Parameters

Defaults

Disabled

metric: 1

Command Modes

ROUTER RIP

Command

History

Usage

Information

The default route must be present in the switch routing table for the

default-information originate

command to take effect.

interface

(OPTIONAL) Enter the interface type and ID as one of the following:

•

For a Port Channel interface, enter the keyword

port-channel

followed by a number:

Range: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the

slot/port information.

•

For a VLAN, enter the keyword

vlan

followed by a number from 1 to 4094.

database

(OPTIONAL) Enter the keyword

database

to display messages when there is a change to

the RIP database.

events

(OPTIONAL) Enter the keyword

events

to debug only RIP protocol changes.

trigger

(OPTIONAL) Enter the keyword

trigger

to debug only RIP trigger extensions.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

always

(OPTIONAL) Enter the keyword

always

to enable the switch software to

always advertise the default route.

metric

metric-value

(OPTIONAL) Enter the keyword

metric

followed by a number as the

metric value.

Range: 1 to 16

Default: 1

route-map

map-name

(OPTIONAL) Enter the keyword

route-map

followed by the name of a

configured route-map.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands

Dell Force10 MXL Blade, Reference Manual

Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands