manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 200

200

|

Dynamic Host Configuration Protocol (DHCP)

www.dell.com | support.dell.com

Introduced in FTOS version 7.8.1.0, DHCP snooping was available for Layer 3 only and dependent on 
DHCP Relay Agent (

ip helper-address

). FTOS version 8.2.1.0 extends DHCP Snooping to Layer 2, 

and you do not have to enable relay agent to snoop on Layer 2 interfaces.

Related

Commands

ip dhcp snooping database

Delay writing the binding table for a specified time.

Syntax

ip dhcp snooping database write-delay

 

minutes

Parameters

Command Modes

CONFIGURATION

Default

none

Command

History

ip dhcp snooping binding

Create a static entry in the DHCP binding table.

Syntax

[no] ip dhcp snooping binding mac 

address

 

vlan-id

 

vlan-id

 

ip

 

ip-address 

interface

 type slot/port 

lease

 number

Parameters

Command Modes

EXEC

EXEC Privilege

Default

none

ip dhcp snooping vlan

Enables DHCP snooping on one or more VLANs.

minutes

Range: 5-21600

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

mac

 address

Enter the keyword 

mac

 followed by the MAC address of the host to which the 

server is leasing the IP address.

vlan-id

 vlan-id

Enter the keyword 

vlan-id

 followed by the VLAN to which the host belongs.

Range: 2-4094

ip

 ip-address

Enter the keyword 

ip

 followed by the IP address that the server is leasing.

interface

 type

Enter the keyword 

interface

 followed by the type of interface to which the host is 

connected.

•

For a Ten Gigabit Ethernet interface, enter the keyword 

tengigabitethernet

. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

.

slot/port

Enter the slot and port number of the interface.

lease

 time

Enter the keyword 

lease

 followed by the amount of time the IP address will be 

leased.

Range: 1-4294967295

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands