manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 265

Interfaces |

265

show interfaces description

Display the descriptions configured on the interface.

Syntax

show interfaces

 [

interface

] 

description

 

Parameters

Command Modes

EXEC

EXEC Privilege

Command

History

 

Example

Figure 14-33.  show interfaces description Command Example 

interface

 

Enter one of the following keywords and slot/port or number information:

•

For Loopback interfaces, enter the keyword 

loopback

 followed by a number from 0 to 

16383.

•

For the management interface on the stack unit enter the keyword 

ManagementEthernet

 followed by the slot/port information. The slot range is 0-0 and 

the port range is 0.

•

For the Null interface, enter the keywords 

null 0

.

•

For a Port Channel interface, enter the keyword 

port-channel

 followed by a number:

Range: 1-128. 

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 followed by 

the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the slot/

port information.

•

For VLAN interfaces, enter the keyword 

vlan

 followed by a number from 1 to 4094.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Table 14-6.  show interfaces description Command Example Fields

Field

Description

Interface

Displays type of interface and associated slot and port number.

OK?

Indicates if the hardware is functioning properly.

Status

States whether the interface is enabled (up) or disabled (administratively down).

FTOS#show interface description
Interface                OK  Status     Protocol    Description
TenGigabitEthernet 0/1   NO  admin down down
TenGigabitEthernet 0/2   NO  admin down down
TenGigabitEthernet 0/3   NO  admin down down
TenGigabitEthernet 0/4   NO  admin down down
TenGigabitEthernet 0/5   NO  admin down down
TenGigabitEthernet 0/6   NO  admin down down
TenGigabitEthernet 0/7   NO  up         down
TenGigabitEthernet 0/8   YES up         up
TenGigabitEthernet 0/9   NO  admin down down
TenGigabitEthernet 0/10  NO  admin down down
TenGigabitEthernet 0/11  NO  admin down down
TenGigabitEthernet 0/12  NO  admin down down
TenGigabitEthernet 0/13  NO  admin down down
TenGigabitEthernet 0/14  NO  admin down down
TenGigabitEthernet 0/15  NO  admin down down
TenGigabitEthernet 0/16  YES up         up
TenGigabitEthernet 0/17  NO  admin down down
TenGigabitEthernet 0/18  NO  admin down down
TenGigabitEthernet 0/19  NO  admin down down
TenGigabitEthernet 0/20  NO  admin down down
TenGigabitEthernet 0/21  NO  admin down down

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands