manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 554

554

|

Security

www.dell.com | support.dell.com

Defaults

Not configured.

Command Modes

CONFIGURATION

Command

History

Usage

Information

To list multiple  servers to be used by the 

aaa authentication login

 command, configure this 

command multiple times. 

If you are not configuring the switch as a  server, you do not need to configure the port, 
timeout and key optional parameters. If you do not configure a key, the key assigned in the 

tacacs-server key

 command is used.

Related

Commands

tacacs-server key

Configure a key for communication between a  server and client.

Syntax

tacacs-server key

 [

encryption-type

] 

key

To delete a key, use the 

no tacacs-server key

 

key 

command.

Parameters

Defaults

Not configured.

Command Modes

CONFIGURATION

Command

History

Usage

Information

The key configured with this command must match the key configured on the  daemon.

timeout

 

seconds

(OPTIONAL) Enter the keyword 

timeout

 followed by the number of seconds 

the switch waits for a reply from the  server. 

Range: 0 to 1000

Default: 10 seconds

key

 

key

(OPTIONAL) Enter the keyword 

key

 followed by a string up to 42 characters 

long as the authentication key. This authentication key must match the key 
specified in the 

tacacs-server key

 for the  daemon.

Configure this parameter last because leading spaces are ignored.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

aaa authentication login

Specifies the login authentication method.

tacacs-server key

Configures a  key for the TACACS server.

encryption-type

(OPTIONAL) Enter either zero (0) or 7 as the encryption type for the 

key

 entered. 

The options are:

•

0 is the default and means the key is not encrypted and stored as clear text.

•

7 means that the key is encrypted and hidden.

key

Enter a text string, up to 42 characters long, as the clear text password.

Leading spaces are ignored.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands