Dell Force10 MXL Blade, Reference Manual

Page: 136 / 732

136 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Related
Commands
match metric
Configure a filter to match on a specified value.
Syntax match metric metric-value
Parameters
Defaults Not configured.
Command Modes ROUTE-MAP
Command
History
Related
Commands
match route-type
Configure a filter to match routes based on the how the route is defined.
Syntax match route-type { external [ type-1 | type-2 ] | internal | local }
Parameters
Defaults
Not configured.
Command Modes
ROUTE-MAP
match interface Redistributes routes that match the next-hop interface.
match ip address Redistributes routes that match an IP address.
match ip next-hop Redistributes routes that match the next-hop IP address.
match metric Redistributes routes that match a specific metric.
match route-type Redistributes routes that match a route type.
match tag Redistributes routes that match a specific tag.
metric-value
Enter a value to match.
Range: zero (0) to 4294967295.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
match interface Redistributes routes that match the next-hop interface.
match ip address Redistributes routes that match an IP address.
match ip next-hop Redistributes routes that match the next-hop IP address.
match ip route-source Redistributes routes that match routes advertised by other routers.
match route-type Redistributes routes that match a route type.
match tag Redistributes routes that match a specific tag.
external
[
type-1| type-2
] Enter the keyword
external
followed by either
type-1
or
type-2
to
match only on OSPF Type 1 routes or OSPF Type 2 routes.
internal
Enter the keyword
internal
to match only on routes generated within
OSPF areas.
local
Enter the keyword
local
to match only on routes generated within the
switch.