manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 243

Interfaces |

243

Related

Commands

 

interface 

Configure a physical interface on the switch.

Syntax

interface 

interface

Parameters

 

Defaults

Not configured.

Command Modes

CONFIGURATION

Command

History

Example

Figure 14-7.  interface Command Example 

Usage

Information

You cannot delete a physical interface.

By default, physical interfaces are disabled (

shutdown

) and are in Layer 3 mode. To place an interface 

in mode, ensure that the interface’s configuration does not contain an IP address and enter the 

Port 

Channel Commands

 command.

Related

Commands

show running-config

Displays the flow configuration parameters (non-default values only).

show interfaces

Display information on a specific physical interface or virtual interface.

interface

Enter one of the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 

followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the 

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

FTOS(conf)#interface tengig 0/0
FTOS(conf-if-tengig-0/0)#exit#

interface loopback

Configures a Loopback interface.

interface null

Configures a Null interface.

interface port-channel

Configures a port channel.

interface vlan

Configures a VLAN.

show interfaces

Displays interface configuration.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands