manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 406

406

|

Open Shortest Path First (OSPFv2)

www.dell.com | support.dell.com

Defaults

Not configured.

Command Modes

ROUTER OSPF

Command

History

Usage

Information

To redistribute the default route (0.0.0.0/0), configure the 

default-information originate 

 command.

Related

Commands

router-id

Use this command to configure a fixed router ID.

Syntax

router-id

 

ip-address

 

To remove the fixed router ID, use the 

no router-id

 

ip-address 

command.

Parameters

 

Defaults

none

Command Modes

ROUTER OSPF

Command

History

Example

Figure 21-2. 

router-id Command Example

metric-type

 

type-value

(OPTIONAL) Enter the keyword 

metric-type

 followed by one of the 

following:

•

1 = OSPF External type 1

•

2 = OSPF External type 2

route-map 

map-name

(OPTIONAL) Enter the keyword 

route-map

 followed by the name of the 

route map.

tag 

tag-value

(OPTIONAL) Enter the keyword 

tag

 followed by a number.

Range: 0 to 4294967295

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

default-information originate 

Generates a default route into the OSPF routing domain.

ip-address

Enter the router ID in the IP address format

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

FTOS(conf)#router ospf  100
FTOS(conf-router_ospf)#router-id 1.1.1.1
Changing router-id will bring down existing OSPF adjacency [y/n]: 

FTOS(conf-router_ospf)#show config 
!
router ospf 100
router-id 1.1.1.1
FTOS(conf-router_ospf)#no router-id 
Changing router-id will bring down existing OSPF adjacency [y/n]: 
FTOS#

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands