Dell Force10 MXL Blade Reference Manual Download Page 646

Page: 646 / 732

646

Uplink Failure Detection (UFD)

www.dell.com | support.dell.com

Parameters

Command Modes

EXEC Mode

Command

History

Related

Commands

debug uplink-state-group

Enable debug messages for events related to a specified uplink-state group or all groups.

Syntax

debug uplink-state-group

[

group-id

]

To turn off debugging event messages, use the

no debug uplink-state-group

[

group-id

] command.

Parameters

Defaults

none

Command Modes

EXEC Privilege

Command

History

Related

Commands

interface interface

Specifies one or more downstream interfaces.
For

interface

, enter one of the following interface types:

10-Gigabit Ethernet:

tengigabitethernet

{

slot

port

slot

port-range

}

40-Gigabit Ethernet:

fortygigabitethernet

{

slot

port

slot

port-range

}

Port channel:

port-channel

{1-512 |

port-channel-range

}

Where

port-range

and

port-channel-range

specify a range of ports

separated by a dash (-) and/or individual ports/port channels in any
order; for example:

tengigabitethernet 1/1-2,5,9,11-12

port-channel 1-3,5

A comma is required to separate each port and port-range entry.

uplink-state-group
group-id

Re-enables all UFD-disabled downstream interfaces in the group.
Valid

group-id

values are 1 to 16.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

downstream

Assigns a port or port-channel to the uplink-state group as a downstream

interface.

upstream

Assigns a port or port-channel to the uplink-state group as an upstream interface.

uplink-state-group

Creates an uplink-state group and enable the tracking of upstream links.

group-id

Enables debugging on the specified uplink-state group. Valid

group-id

values

are 1 to 16.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

clear ufd-disable

Re-enables downstream interfaces that are in a UFD-disabled error state.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands

Dell Force10 MXL Blade, Reference Manual

Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Related manuals for Force10 MXL Blade

Brands by name

Popular brands