manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 639

System Time and Date |

639

ntp disable

Prevent an interface from receiving NTP packets.

Syntax

ntp disable

To re-enable NTP on an interface, use the 

no ntp disable

 command.

Default

Disabled (that is, if an NTP host is configured, all interfaces receive NTP packets)

Command Modes

INTERFACE 

Command

History

ntp multicast client

Configure the switch to receive NTP information from the network via multicast.

Syntax

ntp multicast client

 [

multicast-address

]

To disable multicast reception, use the 

no ntp multicast client [

multicast-address

]

 command.

Parameters

Defaults

Not configured.

Command Modes

INTERFACE

Command

History

ntp server

Configure an NTP time-serving host.

Syntax

ntp server 

{

hostname

 | 

ipv4-address

}

 

[

key 

keyid

] [

prefer

] [

version 

number

]

Parameters

 

Defaults

Not configured.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

multicast-address

(OPTIONAL) Enter a multicast address. Enter an IPv4 address in dotted decimal 
format. If you do not enter a multicast address, the address 224.0.1.1 is 
configured if the interface address is IPv4.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

ipv4-address

Enter an IPv4 address (A.B.C.D).

hostname

Enter the hostname of the server.

key 

keyid

(OPTIONAL) Enter the keyword 

key

 and a number as the NTP peer key.

Range: 1 to 4294967295

prefer

(OPTIONAL) Enter the keyword 

prefer

 to indicate that this peer has priority over other 

servers.

version 

number

(OPTIONAL) Enter the keyword 

version

 and a number to correspond to the NTP 

version used on the server.

Range: 1 to 3 

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands