manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 358

358

|

Link Layer Discovery Protocol (LLDP)

www.dell.com | support.dell.com

Parameters

 

Defaults

none

Command Modes

EXEC Privilege

Command

History

debug lldp interface 

Enable LLDP debugging to display timer events, neighbor additions or deletions, and other 
information about incoming and outgoing packets.

Syntax

debug lldp interface 

{

interface

 | 

all

}{

events 

| 

packet

 {

brief

 | 

detail

} {

tx

 | 

rx

 | 

both

}}

To disable debugging, use the 

no debug lldp interface 

{

interface

 | 

all

}{

events

} {

packet

 {

brief

 | 

detail

} {

tx

 | 

rx

 | 

both

}} command.

Parameters

 

Defaults

none

Command Modes

EXEC Privilege

Command

History

interface

Enter the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword 

tenGigabitEthernet 

followed by the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the 

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

interface

Enter the following keywords and slot/port or number information:

•

For a 10-Gigabit Ethernet interface, enter the keyword 

tenGigabitEthernet 

followed by the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by 

the slot/port information.

all

(OPTIONAL) Enter the keyword 

all 

to display information on all interfaces.

events

(OPTIONAL) Enter the keyword 

events 

to display major events such as timer 

events.

packet

(OPTIONAL) Enter the keyword 

packet 

to display information regarding packets 

coming in or going out.

brief

(OPTIONAL) Enter the keyword 

brief 

to display brief packet information.

detail

(OPTIONAL) Enter the keyword 

detail 

to display detailed packet information.

tx

(OPTIONAL) Enter the keyword 

tx 

to display transmit only packet information.

rx

(OPTIONAL) Enter the keyword 

rx 

to display receive only packet information

both

(OPTIONAL) Enter the keyword 

both 

to display both receive and transmit packet 

information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands