manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 398

398

|

Open Shortest Path First (OSPFv2)

www.dell.com | support.dell.com

ip ospf authentication-key

Enable authentication and set an authentication key on OSPF traffic on an interface.

Syntax

ip ospf authentication-key

 [

encryption-type

] 

key

To delete an authentication key, use the 

no ip ospf authentication-key

 command.

Parameters

 

Defaults

Not configured.

Command Modes

INTERFACE

Command

History

Usage

Information

All neighboring routers in the same network must use the same password to exchange OSPF 

information.

ip ospf cost

Change the cost associated with the OSPF traffic on an interface.

Syntax

ip ospf cost

 

cost

To return to default value, use the 

no ip ospf cost

 command.

Parameters

 

Defaults

The default cost is based on the reference bandwidth.

Command Modes

INTERFACE

Command

History

Usage

Information

If this command is not configured, cost is based on the 

auto-cost 

command.

When you configure OSPF over multiple vendors, use the 

ip ospf cost 

command to ensure that all 

routers use the same cost. Otherwise, OSPF routes improperly.

Related

Commands

 

encryption-type

 

(OPTIONAL) Enter 7 to encrypt the key.

key

Enter an 8 character string. Strings longer than 8 characters are truncated.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

cost

Enter a number as the cost.

Range: 1 to 65535.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

auto-cost 

Controls how the OSPF interface cost is calculated.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands