manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 459

Per-VLAN Spanning Tree Plus (PVST+) |

459

vlan forward-delay 

Set the amount of time the interface waits in the Listening State and the Learning State before 
transitioning to the Forwarding State. 

Syntax

vlan 

<vlan-id>

 forward-delay 

seconds

To return to the default setting, enter 

no vlan forward-delay

 command.

Parameters

 

Defaults

15 seconds

Command Modes

CONFIGURATION (conf-pvst)

Command

History

Related

Commands

 

vlan hello-time 

Set the time interval between generation of PVST+ 7Bridge Protocol Data Units (BPDUs).

Syntax

vlan 

<vlan-id> 

hello-time

 seconds 

To return to the default value, enter 

no vlan hello-time

 

command.

Parameters

 

Defaults

2 seconds

Command Modes

CONFIGURATION (conf-pvst)

Command

History

vlan 

vlan-range

Enter the keyword 

vlan

 followed by the VLAN number(s).

Range: 1 to 4094

forward-delay 

seconds

Enter the keyword 

forward-delay

 followed by the time interval, in seconds, that 

FTOS waits before transitioning PVST+ to the forwarding state.

Range: 4 to 30 seconds

Default: 15 seconds

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

vlan bridge-priority

Set the bridge-priority value

vlan hello-time

Change the time interval between BPDUs

vlan max-age

Change the time interval before PVST+ refreshes

show spanning-tree pvst

Display the PVST+ configuration

vlan 

vlan-range

Enter the keyword 

vlan

 followed by the VLAN number(s).

Range: 1 to 4094

hello-time 

seconds

Enter the keyword 

hello-time

 followed by the time interval, in seconds, 

between transmission of BPDUs.

Range: 1 to 10 seconds

Default: 2 seconds

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands