manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 277

Interfaces |

277

Port Channel Commands

A link aggregation group (LAG) is a group of links that appear to a MAC client as if they were a single 

link according to IEEE 802.3ad. In FTOS, a LAG is referred to as a Port Channel.

Table 14-9.  Port Channel Limits

Because each port can be assigned to only one Port Channel, and each Port Channel must have at least 
one port, some of those nominally available Port Channels might have no function because they could 
have no members if there are not enough ports installed. In the MXL 10/40GbE Switch IO Module, 
those ports could be provided by stack members.

The commands in this section are specific to Port Channel interfaces:

•

channel-member

•

group

•

interface port-channel

•

minimum-links

•

port-channel failover-group

•

show config

•

show interfaces port-channel

channel-member 

Add an interface to the Port Channel, while in the INTERFACE PORTCHANNEL mode.

Syntax

channel-member 

interface

 

To delete an interface from a Port Channel, use the 

no

 

channel-member

 

interface

 command.

Parameters

 

Defaults

Not configured.

Command Modes

INTERFACE PORTCHANNEL

Command

History

Platform

Maximum Port Channel 

IDs

Maximum Members per Port 

Channel

MXL Switch 

128

16

Note: 

The FTOS implementation of LAG or Port Channel requires that you configure a LAG 

on both switches manually. For information on FTOS Link Aggregation Control Protocol 
(LACP) for dynamic LAGs, refer to 

Chapter 17, Link Aggregation Control Protocol (LACP)

. 

For more information on configuring and using Port Channels, refer to the 

FTOS 

Configuration Guide

.

interface

Enter the following keywords and slot/port or number information:

•

For a Ten Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 

followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the 

slot/port information.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands