manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 119

Access Control Lists (ACL) |

119

show mac accounting access-list

Display

 MAC access list configurations and counters (if configured).

Syntax

show mac accounting access-list

 

access-list-name

 

interface

 

interface 

in | out

Parameters

Command Modes

EXEC

EXEC Privilege

Command

History

Example

Figure 6-6.  show mac accounting access-list Command Example

Usage

Information

The ACL hit counters in this command increment the counters for each matching rule, not just the first 
matching rule.

access-list-name

Enter the name of a configured MAC ACL, up to 140 characters.

interface

 

interface

Enter the keyword 

interface

 followed by the one of the following keywords 

and slot/port or number information:

•

For a Port Channel interface, enter the keyword 

port-channel

 followed 

by a number:

Range: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEtherne

t followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 

followed by the slot/port information.

in | out

Identify whether ACL is applied ay Ingress (in) or egress (out) side.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

FTOS#show mac accounting access-list mac-ext interface po 1
Extended mac access-list mac-ext on TenGigabitEthernet 0/11
 seq 5  permit host  00:00:00:00:00:11 host  00:00:00:00:00:19  count (393794576  
packets)
 seq 10  deny host  00:00:00:00:00:21 host  00:00:00:00:00:29  count (89076777 
packets)
 seq 15  deny host  00:00:00:00:00:31 host  00:00:00:00:00:39  count (0 packets)
 seq 20  deny host  00:00:00:00:00:41 host  00:00:00:00:00:49  count (0 packets)
 seq 25  permit any any  count (0 packets)
Extended mac access-list mac-ext on TenGigabitEthernet 0/12
 seq 5  permit host  00:00:00:00:00:11 host  00:00:00:00:00:19  count (57589834 
packets)
 seq 10  deny host  00:00:00:00:00:21 host  00:00:00:00:00:29  count (393143077 
packets)
 seq 15  deny host  00:00:00:00:00:31 host  00:00:00:00:00:39  count (0 packets)
 seq 20  deny host  00:00:00:00:00:41 host  00:00:00:00:00:49  count (0 packets)
 seq 25  permit any any  count (0 packets)
FTOS#

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands