Dell Force10 MXL Blade, Reference Manual

Page: 293 / 732

IPv4 Routing | 293
clear ip fib stack-unit
Clear all forwarding information base (fib) entries in the specified stack unit (use this command with
caution, refer to
Usage Information ).
Syntax clear ip fib stack-unit unit-number
Parameters
Command Mode
EXEC
EXEC Privilege
Command
History
Usage
Information
Use this command to clear Layer 3 CAM inconsistencies.
Related
Commands
clear ip route
Clear one or all routes in the routing table.
Syntax
clear ip route {* | ip-address mask }
Parameters
Command Modes EXEC Privilege
Command
History
Related
Commands
clear tcp statistics
Clear TCP counters.
Syntax clear tcp statistics
unit-number Enter the stack-unit number.
Range: 0 to 5
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Caution:
Executing this command causes traffic disruption.
show ip fib stack-unit Shows the FIB entries.
*
Enter an asterisk (
*
) to clear all learned IP routes.
ip-address mask
Enter a specific IP address and mask in dotted decimal format to clear
that IP address from the routing table.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
ip route Assigns an IP route to the switch.
show ip route Views the routing table.
show ip route summary Views a summary of the routing table.