manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

The Dell Force10 MXL Blade is a cutting-edge network switch designed for high-performance data centers. Unlock its full potential by easily configuring its advanced features through our comprehensive and user-friendly manual, available for free download at manualshive.com. Empower your network infrastructure today with this unparalleled product.

Share
Download
background image

252

|

Interfaces

www.dell.com | support.dell.com

Example

Figure 14-20.  monitor Command Example of a Single Interface 

mtu

Set the Maximum Link MTU (frame size) for an Ethernet interface. 

Syntax

mtu

 

value

 

To return to the default MTU value, use the 

no mtu

 command.

Table 14-2.  monitor Command Menu Options

Key Description

systest-3

Displays the host name assigned to the system.

monitor time

Displays the amount of time since the 

monitor interface

 command was entered.

time

Displays the amount of time the chassis is up (since last reboot).

m

Change the view from a single interface to all interfaces on the stack unit or visa-versa.

c

Refresh the view.

b

Change the counters displayed from Packets on the interface to Bytes.

r

Change the [delta] column from change in the number of packets/bytes in the last interval to 
rate per second.

l

Change the view to next interface on the stack unit, or if in the stack unit mode, the next 
stack unit in the chassis.

a

Change the view to the previous interface on the stack unit, or if the stack unit mode, the 
previous stack unit in the chassis.

T

Increase the screen refresh rate.

t

Decrease the screen refresh rate.

q

Return to the CLI prompt.

 systest-3   Monitor time: 00:00:06   Refresh Intvl.: 2s   Time: 03:26:26

 Interface: tengig 0/3, Enabled, Link is Up, Linespeed is 1000 Mbit

  Traffic statistics:              Current           Rate                Delta
         Input bytes:              9069828         43 Bps                   86
        Output bytes:            606915800         43 Bps                   86
       Input packets:                54001          0 pps                    1
      Output packets:              9401589          0 pps                    1
         64B packets:                   67          0 pps                    0
    Over 64B packets:                49166          0 pps                    1
   Over 127B packets:                  350          0 pps                    0
   Over 255B packets:                 1351          0 pps                    0
   Over 511B packets:                  286          0 pps                    0
  Over 1023B packets:                 2781          0 pps                    0
 Error statistics:
     Input underruns:                    0          0 pps                    0
        Input giants:                    0          0 pps                    0
     Input throttles:                    0          0 pps                    0
           Input CRC:                    0          0 pps                    0
   Input IP checksum:                    0          0 pps                    0
       Input overrun:                    0          0 pps                    0
    Output underruns:                    0          0 pps                    0
    Output throttles:                    0          0 pps                    0

       m - Change mode                            c - Clear screen
       l - Page up                                a - Page down
       T - Increase refresh interval              t - Decrease refresh interval
       q - Quit

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Force10 MXL Blade

PaloAlto Networks M-100 Hardware Reference Manual preview
M-100
Brand: PaloAlto Networks Pages: 30
ACTi ACD-2200 Quick Installation Manual preview
ACD-2200
Brand: ACTi Pages: 15
B&B ES1AWB Instruction Manual preview
ES1AWB
Brand: B&B Pages: 55
Lucent Technologies Definity 8510T User Manual preview
Definity 8510T
Brand: Lucent Technologies Pages: 85
xFusion Digital Technologies FusionServer G5500 V6 Manual preview
FusionServer G5500 V6
Brand: xFusion Digital Technologies Pages: 100
Olive O3HD Quick Start Manual preview
O3HD
Brand: Olive Pages: 103
Supermicro SuperServer 1019D-FRN8TP User Manual preview
SuperServer 1019D-FRN8TP
Brand: Supermicro Pages: 126
3onedata NP301 Quick Installation Manual preview
NP301
Brand: 3onedata Pages: 3
HP ProLiant BL460c Gen8 User Manual preview
ProLiant BL460c Gen8
Brand: HP Pages: 84
Mitsubishi Electric MES3-255C-DM-EN User Manual preview
MES3-255C-DM-EN
Brand: Mitsubishi Electric Pages: 48
Mitsubishi Electric apricot FTs 486 Add-On Installation Manual preview
apricot FTs 486
Brand: Mitsubishi Electric Pages: 17
Mitsubishi Electric DX-VS1UE Setup Manual preview
DX-VS1UE
Brand: Mitsubishi Electric Pages: 32
Mitsubishi Electric FT5000 Handbook preview
FT5000
Brand: Mitsubishi Electric Pages: 117
Bosanova XTC-600 Specifications preview
XTC-600
Brand: Bosanova Pages: 2
Bosanova RBT-366 Specifications preview
RBT-366
Brand: Bosanova Pages: 2
Vitek VT-IPSD102H - Manual preview
VT-IPSD102H -
Brand: Vitek Pages: 55
Red Hat NETWORK PROXY 5.3.0 - Installation Manual preview
NETWORK PROXY 5.3.0 -
Brand: Red Hat Pages: 48
3onedata ICP222-2F-2CI Quick Installation Manual preview
ICP222-2F-2CI
Brand: 3onedata Pages: 3

Brands by name

Popular brands

Load more brands