Dell Force10 MXL Blade Reference Manual Download Page 51

Page: 51 / 732

Control and Monitoring |

ip telnet source-interface

Set an interface’s IP address as the source address in outgoing packets for Telnet sessions.

Syntax

telnet

source-interface

interface

Parameters

Defaults

The IP address on the system that is closest to the Telnet address is used in the outgoing packets.

Command Modes

CONFIGURATION

Command

History

Related

Commands

ip tftp source-interface

Assign an interface’s IP address in outgoing packets for TFTP traffic.

Syntax

ip tftp source-interface

interface

Parameters

Defaults

The IP address on the system that is closest to the Telnet address is used in the outgoing packets.

Command Modes

CONFIGURATION

Command

History

interface

Enter the following keywords and slot/port or number information:

•

For Loopback interfaces, enter the keyword

loopback

followed by a number from zero (0)

to 16383.

•

For a Port Channel, enter the keyword

port-channel

followed by a number:

Range

: 1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by

the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the slot/port

information.

•

For VLAN interface, enter the keyword

vlan

followed by a number from 1 to 4094.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

telnet

Telnets to another device.

interface

Enter the following keywords and slot/port or number information:

•

For Loopback interfaces, enter the keyword

loopback

followed by a number from zero

(0) to 16383.

•

For a Port Channel, enter the keyword

port-channel

followed by a number:1-128

•

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet

followed by

the slot/port information.

•

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE

followed by the slot/

port information.

•

For a VLAN interface, enter the keyword

vlan

followed by a number from 1 to 4094.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Brands by name

Popular brands

Dell Force10 MXL Blade, Reference Manual

Search results

Summary of Contents for Force10 MXL Blade

Reviews:

Brands by name

Popular brands