manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 477

Quality of Service (QoS) |

477

Defaults

Burst size is 100 KB. 

peak-rate

 is by default the same as 

committed-rate

. Granularity for 

committed-rate 

and 

peak-rate

 is Mbps unless the 

kbps

 option is used.

Command Modes

QOS-POLICY-IN

Command

History

Related

Commands

rate-shape

Shape traffic output as part of the designated policy. 

Syntax

rate-shape 

[

kbps

]

 

rate

 [

burst-KB

]

Parameters

Defaults

Burst size is 50 KB. Granularity for 

rate

 is Mbps unless the 

kbps

 option is used.

Command Modes

QOS-POLICY-OUT

Command

History

Usage

Information

When rate-shape in QoS policy is applied both on queue level and aggregate mode, the queue-based 
shaping occurs first followed by the aggregate rate shaping.

Related

Commands

burst-KB

(OPTIONAL) Enter the burst size in KB.

Range: 16 to 200000 KB

Default: 100 KB

peak

 

peak-rate

(OPTIONAL) Enter the keyword 

peak

 followed by the peak rate in Mbps.

Range: 0 to 10000 Mbps

Default: Same as designated for 

committed-rate

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

rate police

Specifies traffic policing on the selected interface. 

qos-policy-input

Creates a QoS output policy.

kbps

Enter this keyword to specify the rate limit in Kilobits per second (Kbps). On 
MXL Switch, make the following value a multiple of 64. The default granularity 
is Megabits per second (Mbps).

Range: 0-40000000 (Kbps)

rate

 

Enter the outgoing rate in multiples of 10 Mbps.

Range: 10 to 10000

burst-KB

 

(OPTIONAL) Enter a number as the burst size in KB.

Range: 0 to 10000

Default: 50

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

rate shape

Shapes the traffic output of the selected interface.

qos-policy-output

Creates a QoS output policy.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands