manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 334

334

|

Link Aggregation Control Protocol (LACP)

www.dell.com | support.dell.com

Parameters

 

* The LACP modes are defined in 

Table 17-1

.

Defaults

off

 

Command Modes

INTERFACE-LACP

Command

History

Usage

Information

Table 17-1

 lists the LACP modes.

Table 17-1.  LACP Modes 

port-channel-protocol lacp

Enable LACP on any LAN port.

Syntax

port-channel-protocol lacp 

To disable LACP on a LAN port, use the 

no port-channel-protocol lacp

 command.

Command Modes

INTERFACE

Command

History

Example

Figure 17-1.  port-channel-protocol lacp Command Example 

number

Enter the keyword 

port-channel

 followed by a number:

Range: 1 to 128

active

Enter the keyword 

active

 to set the mode to the active state.* 

passive

Enter the keyword 

passive

 to set the mode to the passive state.*

off

Enter the keyword 

off

 to set the mode to the off state.*

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Mode

Function

active

An interface is in an active negotiating state in this mode. LACP runs on any link 

configured in the active state and also automatically initiates negotiation with other 
ports by initiating LACP packets.

passive

An interface is not in an active negotiating state in this mode. LACP runs on any link 

configured in the passive state. Ports in a passive state respond to negotiation requests 
from other ports that are in active states. Ports in a passive state respond to LACP 
packets.

off

An interface can not be part of a dynamic port channel in the off mode. LACP will not 

run on a port configured in the off mode. 

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

FTOS(conf)#interface TenGigabitethernet 3/15
FTOS(conf-if-tengig-3/15)#no shutdown
FTOS(conf-if-tengig-3/15)#port-channel-protocol lacp
FTOS(conf-if-tengig-3/15-lacp)#port-channel 32 mode active
...
FTOS(conf)#interface TenGigabitethernet 3/16
FTOS(conf-if-tengig-3/16)#no shutdown
FTOS(conf-if-tengig-3/16)#port-channel-protocol lacp
FTOS(conf-if-tengig-3/16-lacp)#port-channel 32 mode active

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands