manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 389

Open Shortest Path First (OSPFv2) |

389

Related

Commands

auto-cost

Specify how the OSPF interface cost is calculated based on the reference bandwidth method.

Syntax

auto-cost

 [

reference-bandwidth

 

ref-bw

]

To return to the default bandwidth or to assign cost based on the interface type, use the 

no auto-cost 

[

reference-bandwidth

] command.

Parameters

Defaults

100 megabits per second.

Command Modes

ROUTER OSPF

Command

History

clear ip ospf

Clear all OSPF routing tables.

Syntax

clear ip ospf

 

process-id 

[

process

] 

Parameters

 

Command Modes

EXEC Privilege

Command

History

router ospf 

Enters the ROUTER OSPF mode to configure an OSPF instance.

ref-bw

(OPTIONAL) Specify a reference bandwidth in megabits per second. 

Range: 1 to 4294967

Default: 100 megabits per second.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

process-id

Enter the OSPF Process ID to clear a specific process.

If no Process ID is entered, all OSPF processes are cleared.

process

(OPTIONAL) Enter the keyword 

process

 to reset the OSPF process. 

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands