manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 25

File Management |

25

format flash 

Erase all existing files and reformat the filesystem in the internal flash memory. After the filesystem is 
formatted, files cannot be restored.

Syntax

format {flash: | usbflash:}

Default

flash memory

Command Modes

EXEC Privilege

Command

History

Usage

Information

You must include the colon (:) when entering this command.

Related

Commands

 

logging coredump

Enable coredump.

Syntax

logging coredump stack-unit all

Command Modes

CONFIGURATION

Command

History

Usage

Information

The Kernel core dump can be large and may take up to five to 30 minutes to upload. FTOS does not 
overwrite application core dumps so delete them as necessary to conserve space on the flash; if the 
flash is out of memory, the coredump is aborted. FTOS completes the coredump process and waits 
until the upload is complete before rebooting the system.

Related

Commands

 

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Caution: 

This command deletes all files, including the startup configuration file. So, after 

executing this command, consider saving the running config as the startup config (use the 

write memory

 command or the 

copy run start

 command).

copy

Copies the current configuration to either the startup-configuration file or the 
terminal.

show file

Displays the contents of a text file in the local filesystem. 

show file-systems

Displays information about the file systems on the system. 

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

logging coredump server

Designates a sever to upload kernel core-dumps.

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands