manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 292

292

|

IPv4 Routing

www.dell.com | support.dell.com

clear arp-cache

Clear the dynamic ARP entries from a specific interface or optionally delete (

no-refresh

) ARP entries 

from CAM.

Syntax

clear arp-cache

 [

interface

 | 

ip

 

ip-address

] [

no-refresh

] 

Parameters

Command Modes

EXEC Privilege

Command

History

clear host

Remove one or all dynamically learnt host table entries.

Syntax

clear host

 

name 

Parameters

Command Modes

EXEC Privilege

Command

History

interface

(OPTIONAL) Enter the following keywords and slot/port or number information:

•

For the Management interface, enter the keyword 

ManagementEthernet

 

followed by the slot/port information. The slot range is 0 and the port range is 0.

•

For a Port Channel interface, enter the keyword 

port-channel

 followed by a 

number:

Range: 1 to 128

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 

followed by the slot/port information. 

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by 

the slot/port information.

•

For a VLAN, enter the keyword 

vlan

 followed by a number from 1 to 4094.

ip

 

ip-address

 

(OPTIONAL) Enter the keyword ip followed by the IP address of the ARP entry 
you wish to clear.

no-refresh

(OPTIONAL) Enter the keyword 

no-refresh

 to delete the ARP entry from CAM. 

Or use this option with 

interface

 or 

ip

 

ip-address 

to specify which dynamic 

ARP entries you want to delete.

Note: 

Transit traffic may not be forwarded during the period when deleted 

ARP entries are resolved again and re-installed in CAM. Use this option with 

extreme caution.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

name

Enter the name of the host to delete.

Enter * to delete all host table entries.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands