manualshive.com logo in svg

Dell Force10 MXL Blade, Reference Manual

Share
Download
Dell Force10 MXL Blade Reference Manual Download Page 161

Data Center Bridging |

161

Parameters

 

Defaults

The PFC buffer is enabled on all ports on the stack unit.

Command Modes

CONFIGURATION

Command

History

Usage

Information

If you configure PFC on a 40GbE port, count the 40GbE port as four PFC-enabled ports in the 

pfc-port

 

number you enter in the command syntax.

To achieve lossless PFC operation, the PFC port count and queue number used for the reserved buffer 
size that is created must be greater than or equal to the buffer size required for PFC-enabled ports and 
lossless queues on the switch.

You must reload the stack or a specified stack unit (use the 

reload

 command in EXEC Privilege mode) 

for the PFC buffer configuration to take effect.

Related

Commands

dcb stack-unit pfc-buffering pfc-port pfc-queues 

Configure the PFC buffer for all port pipes in a specified stack unit by specifying the port-pipe number, 
number of PFC-enabled ports, and number of configured lossless queues.

Syntax

dcb stack-unit 

stack-unit-id

 [port-set 

port-set-id

] pfc-buffering pfc-ports {

1-56

} pfc-queues {

1-2

}

To remove the configuration for the PFC buffer on all port pipes in a specified stack unit, use the 

no 

dcb stack-unit 

stack-unit-id

 [port-set 

port-set-id

] pfc-buffering pfc-ports pfc-queues 

command.

Parameters

 

Command Modes

CONFIGURATION

Command

History

pfc-port-count {

1-56

}

Enter the pfc-port count.

The valid range is 1 to 56.

pfc-queues {

1-2

}

Enter the pfc-queue number.

The valid range is 1 to 2.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

dcb stack-unit pfc-buffering pfc-port 
pfc-queues

Configure the PFC buffer for all port pipes in a specified stack 
unit.

stack-unit-id

Enter the stack-unit identification.

The valid stack-unit IDs are 0 to 5.

port-set

Enter the port-set identification.

The only valid port-set ID (port-pipe number) on an MXL Switch is 0.

pfc-ports {

1-56

}

Enter the pfc-ports.

The valid range is 1 to 56.

pfc-queues {

1-2

}

Enter the pfc-queue number.

The valid range is 1 to 2.

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Summary of Contents for Force10 MXL Blade





























































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands