D-Link NetDefendOS User Manual Download | Manualshive

Page: 724 / 912

background image

Default:

Depends on the hardware model

IKE Send Initial Contact

Determines whether or not IKE should send the "Initial Contact" notification message. This
message is sent to each remote endpoint when a connection is opened to it and there are no
previous IPsec SA using that gateway.

Default:

Enabled

IKE Send CRLs

Dictates whether or not CRLs (Certificate Revocation Lists) should be sent as part of the IKE
exchange. Should typically be set to ENABLE except where the remote peer does not understand
CRL payloads.

Note that this setting requires a restart to take effect.

Default:

Enabled

IPsec Before Rules

Pass IKE and IPsec (ESP/AH) traffic sent to NetDefendOS directly to the IPsec engine without
consulting the rule set.

Default:

Enabled

IKE CRL Validity Time

A CRL contains a "next update" field that dictates the time and date when a new CRL will be
available for download from the CA. The time between CRL updates can be anything from a few
hours and upwards, depending on how the CA is configured. Most CA software allow the CA
administrator to issue new CRLs at any time, so even if the "next update" field says that a new
CRL is available in 12 hours, there may already be a new CRL for download.

This setting limits the time a CRL is considered valid. A new CRL is downloaded when
IKECRLVailityTime expires or when the "next update" time occurs. Whichever happens first.

Default:

86400

seconds

IKE Max CA Path

When the signature of a user certificate is verified, NetDefendOS looks at the

issuer name

field in

the user certificate to find the CA certificate the certificate was signed by. The CA certificate may
in turn be signed by another CA, which may be signed by another CA, and so on. Each certificate
will be verified until one that has been marked as "trusted" is found, or until it is determined that
none of the certificates are trusted.

If there are more certificates in this path than what this setting specifies, the user certificate will
be considered invalid.

Default:

15

IPsec Cert Cache Max Certs

Chapter 9: VPN

724

«
...
722
723
724
725
726
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: PaloAlto Networks Pages: 2

Brand: Tandberg Data Pages: 67

Brand: IBASE Technology Pages: 112

Brand: ZyXEL Communications Pages: 1101

Brand: H3C Pages: 59

Brand: H3C Pages: 64

Brand: McAfee Pages: 32

Brand: SonicWALL Pages: 12

DefensePro 6.02

Brand: Radware Pages: 339

Brand: Billion Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands