D-Link NetDefendOS User Manual Download Page 111 | Manualshive

Page: 111 / 912

background image

2.5. SNMP

2.5.1. Management with SNMP

Simple Network Management Protocol

(SNMP) is a standardized protocol for management of

network devices. An SNMP compliant client can connect to a network device which supports the
SNMP protocol to perform management tasks. NetDefendOS supports access by SNMP clients
using the following versions of the SNMP protocol:

•

Version 1.

•

Version 2c.

•

Version 3.

However, only query operations are permitted by clients for security reasons. Specifically,
NetDefendOS supports the following SNMP request operations:

•

The

GET REQUEST

operation.

•

The

GET NEXT REQUEST

operation.

•

The

GET BULK REQUEST

operation (SNMP Version 2c and 3 only).

Setting up SNMP Access in NetDefendOS

To allow access by an SNMP client, an

SNMP Management

object must be created in the

NetDefendOS configuration. This has the following object properties:

•

Protocol - Select

Version 1 and 2c

(the default) or select

Version 3

.

•

Interface - The NetDefendOS interface on which SNMP requests will arrive.

•

Network - The IP address or network from which SNMP requests will come.

The other object properties are for security and depend on the SNMP protocol choice. These are
explained next.

SNMP Security Options

The following are the security options, depending on which protocol is selected:

•

Versions 1 and 2c

Authentication for SNMP Versions 1 and 2c uses the

Community String

property. The

Community String

is equivalent to a password and should be difficult to guess. It should be

constructed in the same way as any other password, using combinations of upper and lower
case letters along with digits.

SNMP versions 1 and 2c do not provide any option for encryption and traffic is sent as plain
text. For this reason, SNMP version 3 is often a better choice. If SNMP version 1 or version 2c
must be used, it is possible to send the SNMP connection through a VPN tunnel that is
established between the client computer and the NetDefend Firewall.

Chapter 2: Management and Maintenance

111

«
...
109
110
111
112
113
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

FortiGate FortiGate-5005FA2

Brand: Fortinet Pages: 30

Brand: Draytek Pages: 22

SECPATH U200-CS

Brand: 3Com Pages: 130

ZyWALL SEM-DUAL

Brand: ZyXEL Communications Pages: 2

ZYWALL 35 - V4.03

Brand: ZyXEL Communications Pages: 142

Brand: Watchguard Pages: 34

NetScreen-10 Series

Brand: NetScreen Technologies Pages: 48

Fiber Defender FD348R

Brand: FIBER SENSYS Pages: 31

Brand: ADTRAN Pages: 2

Brand: ADTRAN Pages: 2

Brand: ADTRAN Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands