D-Link NetDefendOS User Manual Download

Page: 373 / 912

Web Interface

A. Create the first IGMP Rule:

Go to: Network > Routing > IGMP Rules > Add > IGMP Rule

Under General enter:

•

Name: A suitable name for the rule, for example

Reports_if2

•

Type: Report

•

Action: Proxy

•

Output: wan

(this is the relay interface)

Under Address Filter enter:

•

Source Interface: if2

•

Source Network: if2net

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

Click OK

B. Create the second IGMP Rule:

Again, go to: Network > Routing > IGMP Rules > Add > IGMP Rule

Under General enter:

•

Name: A suitable name for the rule, for example

Queries_if2

•

Type: Query

•

Action: Proxy

•

Output: if2

(this is the relay interface)

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: UpstreamRouterIp

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

Click OK

Chapter 4: Routing

373

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NetDefendOS

Reviews:

Related manuals for NetDefendOS

Brands by name

Popular brands

D-Link NetDefendOS, User Manual

Search results

Summary of Contents for NetDefendOS

Reviews:

Related manuals for NetDefendOS

Brands by name

Popular brands