D-Link NetDefendOS User Manual Download | Manualshive

Page: 553 / 912

background image

6.6.2. IDP Subscriptions

The IDP feature must be purchased as an additional subscription, usually for a minimum of one
year. An IDP subscription means that the latest IDP signature database can be downloaded by
NetDefendOS and the database will be regularly updated automatically with the latest threat
signatures.

Figure 6.13. IDP Database Updating

The automatic checking for IDP signature updates by NetDefendOS can be done at a
configurable interval. IDP signature download is done via an HTTP connection to the D-Link
server network. When a new signature database version is available, it is downloaded and the old
database replaced.

Database updating is described further in

Appendix A, Subscribing to Updates

along with a

description of IDP behavior after subscription expiry.

Setting the Correct System Time

It is important that a NetDefendOS has the correct system time set if the auto-update feature in
the IDP module can function correctly. An incorrect time can mean the auto-updating is
disabled.

The following console command will show the current status of the auto-update feature:

> updatecenter -status

This information can also be viewed using the Web Interface by going to: Status > Maintenance
> Update Center.

Chapter 6: Security Mechanisms

553

«
...
551
552
553
554
555
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Fortinet Pages: 2

Brand: Fortinet Pages: 388

KeyGrabber PS/2

Brand: KeeLog Pages: 24

Brand: Huawei Pages: 5

Brand: Huawei Pages: 391

Brand: Huawei Pages: 4

Brand: Huawei Pages: 228

Brand: Huawei Pages: 514

Brand: Watchguard Pages: 4

NetDefend DFL-CP310

Brand: D-Link Pages: 455

NetDefend SOHO DFL-160

Brand: D-Link Pages: 356

DFL-1600 - Security Appliance

Brand: D-Link Pages: 552

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands