manualshive.com logo in svg

D-Link NetDefendOS, User Manual

D-Link NetDefendOS, a comprehensive network security solution, offers robust protection for your business. Seamlessly integrating hardware and software, it ensures superior defense against cyber threats. Enhance your experience with our free User Manuals, available for download at manualshive.com, offering detailed instructions and insights to optimize your network security settings.

Share
Download
background image

Chapter 11: High Availability

This chapter describes the high availability fault-tolerance feature in NetDefend Firewalls.

• Overview, page 820

• HA Mechanisms, page 823

• Setting Up HA, page 827

• HA Issues, page 834

• Upgrading an HA Cluster, page 837

• Link Monitoring and HA, page 839

• HA Advanced Settings, page 840

11.1. Overview

HA Clusters

NetDefendOS

High Availability

(HA) provides a fault tolerant capability for NetDefend Firewall

installations. HA works by adding a back-up

slave

NetDefend Firewall to an existing

master

firewall. The master and slave are connected together by a synchronization link and make up a
logical

HA Cluster

. One of the units in a cluster will be

active

while the other unit will be

inactive

and on standby.

Initially, the cluster slave will be inactive and will only monitor the activity of the master. If the
slave detects that the master has become inoperative, an

HA failover

takes place and the slave

becomes active, assuming processing responsibility for all traffic. If the master later becomes
operative again, the slave will continue to be active but the master will now monitor the slave
with failover only taking place if the slave fails. This is sometimes known as an

active-passive

implementation of fault tolerance.

Note: HA is not available on all NetDefend models

The HA feature is not available on the DFL-260E and DFL-860E.

820

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Keezel keezel Quick Start Manual preview
keezel
Brand: Keezel Pages: 30
Infoblox Infoblox-250-A Installation Manual preview
Infoblox-250-A
Brand: Infoblox Pages: 16
Fortinet FortiGate 60M Installation Manual preview
FortiGate 60M
Brand: Fortinet Pages: 64
ZyXEL Communications ZyXEL ZyWALL 35 User Manual preview
ZyXEL ZyWALL 35
Brand: ZyXEL Communications Pages: 704
Lanner FW-7541 User Manual preview
FW-7541
Brand: Lanner Pages: 51
BaseWall Dual WAN VPN Firewall VPN 2000 User Manual preview
Dual WAN VPN Firewall VPN 2000
Brand: BaseWall Pages: 76
St. Bernard iPrism 3000 User Manual preview
iPrism 3000
Brand: St. Bernard Pages: 4
Check Point Smart-1 series Manual preview
Smart-1 series
Brand: Check Point Pages: 16

Brands by name

Popular brands

Load more brands