D-Link NetDefendOS User Manual Download

Page: 749 / 912

B. Enable transparent mode on the inner interface where the protected network is located.

Example 9.18. L2TPv3 Client Setup

In this example, an

L2TPv3 Client

object called

my_l2tpv3_client

is to be created. This will connect

with the L2TPv3 server with the IP address

l2tpv3_server_ip

This client will connect to the server over an IPsec tunnel called

l2tpv3_ipsec_tunnel

. It is assumed

that the tunnel has already been defined.

Command-Line Interface

A. First, define the

L2TPv3Client

object:

gw-world:/> add Interface L2TPv3Client my_l2tpv3_client

IP=inner_client_ip
LocalNetwork=If1_net
PseudowireType=Ethernet
Protocol=UDP
RemoteEndpoint=l2tpv3_server_ip

B. Next, enable transparent mode on the protected interface

If1

gw-world:/> set Interface Ethernet If1 AutoSwitchRoute=Yes

Web Interface

A. First, define an

L2TPv3 Client

object:

Go to: Network > Interfaces and VPN > L2TPv3 Client > Add > L2TPv3 Client

Now enter:

•

Name: my_l2tpv3_client

•

Inner IP Address: inner_client_ip

•

Local Network: If1_net

•

Pseudowire Type: Ethernet

•

Protocol: UDP

•

Remote Endpoint: l2tpv3_server_ip

Click OK

B. Next, enable transparent mode on the protected interface

If1

Go to: Network > Interfaces and VPN > Ethernet

Select the If1 interface

Select the option Enable transparent mode

Click OK

Chapter 9: VPN

749

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NetDefendOS

Reviews:

Related manuals for NetDefendOS

Brands by name

Popular brands

D-Link NetDefendOS, User Manual

Search results

Summary of Contents for NetDefendOS

Reviews:

Related manuals for NetDefendOS

Brands by name

Popular brands