D-Link NetDefendOS User Manual Download | Manualshive

Page: 529 / 912

background image

When enabled, NetDefendOS will perform a DNS

MX

query, requesting the IP address of a

mail server associated with the email sender's domain. For example, the sender email address
might be

[email protected]

so NetDefendOS will send an

MX

query to the configured

DNS server for the mail server at

example.com

.

If the DNS server recognizes the domain name, NetDefendOS takes no action. If the DNS
server does not recognize the domain, NetDefendOS will add the sub-score for this filtering
option to the overall anti-spam score.

Note that at least one DNS server must be configured in NetDefendOS for this option to work.
If no DNS server is configured, this test will not be performed and its sub-score will not be
added. Configuring DNS servers is described in

Section 3.10, “DNS”

.

This filtering option is enabled by default.

•

Malicious Link Protection

This option neutralizes undesirable or malicious HTML links inside emails. It is enabled by
default and is discussed later in this section in more detail. Finding a single triggering link will
add this option's sub-score (a default value of 10) to the total score.

•

DCC

The

Distributed Checksum Clearinghouses

(DCC) method of filtering involves NetDefendOS

sending anonymous checksums that identify an email to an external

Clearing House

server.

The server returns a value to indicate how many other email recipients have reported
identical checksums. If the returned value is greater than the

DCC Threshold

property set by

the administrator, the sub-score for this filter option is added to the total anti-spam score.

DCC filtering is enabled by default and the default sub-score is 10. The administrator does not
need to define any DCC servers because NetDefendOS uses D-Link's own server network for
this function.

Note that the DCC option is a subscription based feature and will only function if an
appropriate subscription has been purchased. Subscriptions, as well as DCC behavior without
a valid subscription, is discussed further in

Appendix A, Subscribing to Updates

•

DNS Blacklists

By enabling the

DNS Blacklists

option, up to 10 different

DNS Blacklist

(DNBL) servers can be

specified, each with its own sub-score (the default value is 10 per server) that will be added to
the total score if that server flags an email as spam.

If a DNSBL server is not responding then its sub-score is not included in the final score
calculation. How DNSBL functions is explained further in

Section 6.4.3, “DNSBL Databases”

.

Email Tagging

If an email score exceeds the

Tagging Threshold

property, it is marked as being SPAM. This is

done in either or both of two ways:

•

Tag Subject

This is enabled by default and adds text to the subject line of an email. The default text is "

***

SPAM ***

" but this can be set to any string.

Chapter 6: Security Mechanisms

529

«
...
527
528
529
530
531
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Watchguard Pages: 2

SecPath F100-C-A-W

Brand: H3C Pages: 46

Brand: Atos Pages: 55

Brand: NETGEAR Pages: 10

Dual WAN VPN Firewall VPN 2000

Brand: BaseWall Pages: 76

freeGuard Blaze 2100

Brand: Freedom9 Pages: 224

Brand: BluePoint Security Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands