D-Link NetDefendOS User Manual Download | Manualshive

Page: 804 / 912

background image

The threshold is applied separately to connections from different IP addresses.

•

Network Based

The threshold is applied to all connections matching the rules as a group.

Rule Actions

When a Threshold Rule is triggered, one of two responses is possible:

•

Audit

Leave the connection intact but log the event.

•

Protect

Drop the triggering connection.

Logging would be the preferred option if the appropriate triggering value cannot be determined
beforehand. Multiple actions for a given rule might consist of

Audit

for a given threshold while

the action might become

Protect

for a higher threshold.

Multiple Triggered Actions

When a rule is triggered then NetDefendOS will perform the associated rule actions that match
the condition that has occurred. If more than one action matches the condition then those
matching actions are applied in the order they appear in the user interface.

If several actions that have the same combination of Type and Grouping (see above for the
definition of these terms) are triggered at the same time, only the action with the highest
threshold value will be logged.

Exempted Connections

It should be noted that some advanced settings, known as

Before Rules

settings, can exempt

certain types of connections for remote management from examination by the NetDefendOS IP
rule set if they are enabled. These

Before Rules

settings will also exempt the connections from

threshold rules if they are enabled.

Threshold Rules and ZoneDefense

Threshold rules are used in the D-Link

ZoneDefense

feature to block the source of excessive

connection attempts from internal hosts. More information on this feature can be found in

Chapter 12, ZoneDefense

.

Threshold Rule Blacklisting

If the

Protect

option is used, Threshold rules can be configured so that the source that triggered

the rule, is added automatically to a

Blacklist

of IP addresses or networks. If several

Protect

actions

with blacklisting enabled are triggered at the same time, only the first triggered blacklisting
action will be executed by NetDefendOS.

A host based action with blacklisting enabled will blacklist a single host when triggered. A
network based action with blacklisting enabled will blacklist the source network associated with

Chapter 10: Traffic Management

804

«
...
802
803
804
805
806
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Watchguard Pages: 11

Brand: Watchguard Pages: 2

Brand: Watchguard Pages: 6

Brand: IBM Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands