D-Link NetDefendOS User Manual Download Page 371

Page: 371 / 912

•

Name: A suitable name for the rule, for example

Queries

•

Type: Query

•

Action: Proxy

•

Output: IfGrpClients

(this is the relay interface)

Under Address Filter enter:

•

Source Interface: wan

•

Source Network: UpstreamRouterIp

•

Destination Interface: core

•

Destination Network: auto

•

Multicast Source: 192.168.10.1

•

Multicast Group: 239.192.10.0/24

Click OK

4.7.3.2. IGMP Rules Configuration - Address Translation

The following examples illustrates the IGMP rules needed to configure IGMP according to the
Address Translation scenario described above in

Section 4.7.2.3, “Multicast Forwarding - Address

Translation Scenario”

. We need two IGMP report rules, one for each client interface. The interface

if1

uses no address translation and

if2

translates the multicast group to

237.192.10.0/24

. We also

need two query rules, one for the translated address and interface, and one for the original
address towards

if1

Two examples are provided, one for each pair of report and query rule. The upstream multicast
router uses IP UpstreamRouterIP.

Example 4.20. if1 Configuration

The following steps needs to be executed to create the report and query rule pair for if1 which
uses no address translation.

Web Interface

A. Create the first IGMP Rule:

Go to: Network > Routing > IGMP Rules > Add > IGMP Rule

Under General enter:

•

Name: A suitable name for the rule, for example

Reports_if1

•

Type: Report

Chapter 4: Routing

371

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for NetDefendOS

Reviews:

Related manuals for NetDefendOS

Brands by name

Popular brands

D-Link NetDefendOS, User Manual

Search results

Summary of Contents for NetDefendOS

Reviews:

Related manuals for NetDefendOS

Brands by name

Popular brands