D-Link NetDefendOS User Manual Download | Manualshive

Page: 91 / 912

background image

Note: The Syslog server itself must be correctly configured

The external Syslog server itself may have to be configured to correctly receive log
messages from NetDefendOS. Refer to the documentation for the specific Syslog server
being used in order to do this.

RFC 5424 Compliance

By default, NetDefendOS sends Syslog messages in a format that is suitable for most Syslog
servers. However, some servers may require stricter adherence to the latest Syslog standard as
defined by RFC 5424. For this reason, NetDefendOS provides the option to enable strict RFC 5424
compliance.

Setting the Hostname

In the header of every Syslog message there is a string field which is the Syslog

hostname

. By

default, NetDefendOS always sets this to be the IP address of the sending interface.

If RFC 5424 compliance is enabled, it is also possible to set the hostname to a specific value. The
example below shows how this is done.

Example 2.29. Enabling Syslog RFC 5424 Compliance with Hostname

This example enables logging of all events with a severity greater equal to

Emergency

or

Alert

to a

Syslog server with the IPv4 address

192.168.5.1

. RFC 5424 compliance will also be enabled with a

hostname of

my_host1

in the Syslog header.

Command-Line Interface

gw-world:/> add LogReceiver LogReceiverSyslog my_syslog

IPAddress=192.168.5.1
RFC5424=Yes
Hostname=my_host1
LogSeverity=Emergency,Alert

Web Interface

1.

Go to: System > Device > Log and Event Receivers > Add > Syslog Receiver

2.

Specify a name for the event receiver, in this example

my_syslog_host

3.

Enter

192.168.5.1

as the IP Address

4.

Select an appropriate facility from the Facility list.

5.

Enable the option RFC 5424 Compliance.

6.

Enter

my_host1

for the Hostname

7.

Select SeverityFilter and choose

Emergency

and

Alert

as the severities.

8.

Click OK

Chapter 2: Management and Maintenance

91

«
...
89
90
91
92
93
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: StarTech.com Pages: 2

Brand: Elastix Pages: 42

Brand: Nokia Pages: 118

Brand: Nokia Pages: 24

Brand: PaloAlto Networks Pages: 54

Firebox SOHO 6 Wireless

Brand: Watchguard Pages: 2

FireWire 2-Port CardBus

Brand: SIIG Pages: 8

DP FireWire PCIe

Brand: SIIG Pages: 8

FireWire 800 DV Kit

Brand: SIIG Pages: 12

FireWire 800 ExpressCard

Brand: SIIG Pages: 12

Brand: Kerio Pages: 4

MAESTRO R80.20SP

Brand: Check Point Pages: 228

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands