D-Link NetDefendOS User Manual Download Page 510 | Manualshive

Page: 510 / 912

background image

WCF is a Subscription Based Feature

Web content filtering is a feature that is enabled by purchasing a subscription to the service. This
subscription is described further in

Appendix A, Subscribing to Updates

along with details of WCF

behavior after subscription expiry.

Setup Methods

Once a WCF subscription is purchased, the feature can be configured in NetDefendOS. There are
two ways of configuring WCF:

•

With an

IP Rule

object.

•

With an

IP Policy

object. This is discussed further in

Section 6.3.4.3, “WCF Setup with IP Policies”

Summary of WCF Setup with IP Rules

The following steps are used with IP rules:

•

Define an

HTTP ALG

object with

Web Content Filtering

enabled.

Alternatively, use the

Light Weight HTTP ALG

(LW-HTTP ALG). This is preferred as it has less

system overhead and will provide higher traffic throughput. The disadvantage is that certain
features, such as Anti-Virus scanning and stripping static web content, are not supported. The
LW-HTTP ALG is discussed further in

Section 6.2.3, “The Light Weight HTTP ALG”

•

The ALG object is then associated with a

Service

object. It is recommended to create a custom

Service

object for this purpose so the predefined

Service

objects are left unchanged.

•

This

Service

object is then associated with an

IP Rule

object to determine which traffic should

be subject to filtering. This allows a detailed filtering policy to be defined.

Tip: Using a schedule

If the administrator would like the content filtering policy to vary depending on the time
of the day, they can make use of a Schedule object associated with the corresponding IP
rule. For more information about this, see Section 3.8, “Schedules”.

Setting Fail Mode

The option exists to set the HTTP ALG

fail mode

in the same way that it can be set for some other

ALGs and it applies to WCF just as it does to functions such as Anti-Virus scanning. The fail mode
setting determines what happens when web content filtering cannot function. This is usually
because NetDefendOS is unable to reach the external databases to perform URL lookup.

Fail mode can have one of two settings:

•

Deny

If WCF is unable to function then URLs are denied if external database access to verify them is
not possible. The user will see an "Access denied" web page.

Chapter 6: Security Mechanisms

510

«
...
508
509
510
511
512
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Dojo Pages: 34

ZyWALL USG 100 Series

Brand: ZyXEL Communications Pages: 1157

Brand: PaloAlto Networks Pages: 2

Personal aXsGUARD

Brand: Vasco Pages: 49

DIR-330 - Wireless G VPN Router

Brand: D-Link Pages: 3

Brand: Broadcom Pages: 49

Brand: BESTEK Pages: 41

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands