manualshive.com logo in svg

D-Link NetDefendOS, User Manual

D-Link NetDefendOS, a comprehensive network security solution, offers robust protection for your business. Seamlessly integrating hardware and software, it ensures superior defense against cyber threats. Enhance your experience with our free User Manuals, available for download at manualshive.com, offering detailed instructions and insights to optimize your network security settings.

Share
Download
background image

in to the Web Interface or CLI via SSH using a username and password that are checked against
the credentials stored in a local NetDefendOS database.

An alternative to using a local database is to have NetDefendOS perform authentication of the
entered credentials against an external RADIUS server. This is done by changing the properties of
the

Remote Management

object

mgmt_http

for Web Interface access and/or the properties of the

mgmt_ssh

object for CLI access via SSH. Configuring either of these objects for RADIUS

authentication consists of the following steps:

•

Select the Authentication Source property to be

RADIUS

.

•

Select the Authentication Order property to be one of the following:

i.

Local First - The login credentials are first looked up in the local user database. If not
found in the local database, the configured RADIUS servers are queried.

ii.

Local Last - The local database is only queried if none of the configured RADIUS servers
responds to an authentication request.

•

Select one or more RADIUS servers to use for authentication. If there is more than one, they
will be tried sequentially if one is unavailable. The servers selected must have already been
configured as

Radius Server

objects in NetDefendOS (see

Section 8.2.3, “External RADIUS

Servers”

for how to do this).

•

Specify the Admin Groups and/or Audit Groups to decide which kind of access will be given
once login credentials are authenticated by a RADIUS server. These group names are
matched by NetDefendOS against the group name returned for the user by the RADIUS
server. Setting either of these properties to the single wildcard character asterisk "*" means
any group will get that access. Leaving either property blank means no user can have that
type of access.

The administrator group names take precedence over the auditor groups. This means if a
user is first authenticated by being a member of the administrator groups, auditor group
membership is ignored. Therefore, specifying the asterisk "*" character for the Admin
Groups property means that auditor group membership will never be checked.

Note that the wildcard "*" character can be used instead of all or part of a group name. For
example, the string

sys*

means any group name that begins with the three letters

sys

.

Important: Group membership must be defined on the server

It is important to note that

all

management users authenticated by a RADIUS server

must

have their group membership defined on the RADIUS server. They cannot be

authenticated without group membership which NetDefendOS matches against the

Admin Groups

and

Audit Groups

properties.

Note: Set the RADIUS Vendor ID for group membership

If the RADIUS server is required to send the group membership, it is necessary to use the
user group vendor specific attribute vendor when configuring the server. The
NetDefendOS

Vendor ID

is 5089 and the user group is defined as vendor-type 1 with a

string value type.

The Login Message Changes for a Group Mismatch

Chapter 2: Management and Maintenance

68

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Lanner electronics FW-7650 Series User Manual preview
FW-7650 Series
Brand: Lanner electronics Pages: 57
Watchguard SOHO Technical Specifications preview
SOHO
Brand: Watchguard Pages: 2
PaloAlto Networks PA-5400 Series Hardware Reference Manual preview
PA-5400 Series
Brand: PaloAlto Networks Pages: 92
PaloAlto Networks PA-1400 Series Hardware Reference Manual preview
PA-1400 Series
Brand: PaloAlto Networks Pages: 46
D-Link NetDefend DFL Series Quick Manual / User Manual preview
NetDefend DFL Series
Brand: D-Link Pages: 4
D-Link DFL-210-IPS-12 Datasheet preview
DFL-210-IPS-12
Brand: D-Link Pages: 2
D-Link DFL-1100 - Security Appliance Brochure & Specs preview
DFL-1100 - Security Appliance
Brand: D-Link Pages: 2
D-Link DFL-210 - NetDefend - Security Appliance Quick Installation Manual preview
DFL-210 - NetDefend - Security Appliance
Brand: D-Link Pages: 32
Check Point Smart-1 series Manual preview
Smart-1 series
Brand: Check Point Pages: 16

Brands by name

Popular brands

Load more brands