D-Link NetDefendOS User Manual Download | Manualshive

Page: 552 / 912

background image

6.6. Intrusion Detection and Prevention

6.6.1. Overview

Intrusion Definition

Computer servers can sometimes have vulnerabilities which leave them exposed to attacks
carried by network traffic. Worms, trojans and backdoor exploits are examples of such attacks
which, if successful, can potentially compromise or take control of a server. A generic term that
can be used to describe these server orientated threats are

intrusions

.

Intrusion Detection

Intrusions differ from viruses in that a virus is normally contained in a single file download and
this is normally downloaded to a client system. An intrusion manifests itself as a malicious
pattern of Internet data aimed at bypassing server security mechanisms. Intrusions are not
uncommon and they can constantly evolve as their creation can be automated by the attacker.
NetDefendOS IDP provides an important line of defense against these threats.

Intrusion Detection and Prevention

(IDP) is a NetDefendOS subsystem that is designed to protect

against these intrusion attempts. It operates by monitoring network traffic as it passes through
the NetDefend Firewall, searching for patterns that indicate an intrusion is being attempted.
Once detected, NetDefendOS IDP allows steps to be taken to neutralize both the intrusion
attempt as well as its source.

The Terms IDP, IPS and IDS

Note that the terms

Intrusion Detection and Prevention

(IDP),

Intrusion Prevention System

(IDP) and

Intrusion Detection System

(IDS) may be used interchangeably in D-Link literature. They all refer to

the same feature, which is known as IDP within NetDefendOS.

IDP Issues

In order to have an effective and reliable IDP system, the following issues have to be addressed:

•

What kinds of traffic should be analyzed?

•

What should we search for in that traffic?

•

What action should be carried out when an intrusion is detected?

NetDefendOS IDP Components

NetDefendOS IDP addresses the above issues with the following mechanisms:

•

IDP Rules are configured by the administrator to determine what traffic should be scanned.

•

Pattern Matching is applied by NetDefendOS IDP to the traffic that matches an IDP Rule as it
streams through the firewall.

•

If NetDefendOS IDP detects an intrusion then the Action specified for the triggering IDP Rule
is taken.

Chapter 6: Security Mechanisms

552

«
...
550
551
552
553
554
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: PaloAlto Networks Pages: 92

Brand: ZyXEL Communications Pages: 705

Brand: ZyXEL Communications Pages: 852

WALL IE 700-860-WAL01

Brand: Helmholz Pages: 39

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands