D-Link NetDefendOS User Manual Download Page 732 | Manualshive

Page: 732 / 912

background image

•

Outer Server IP: wan_ip

4.

Under the PPP Parameters tab, select L2TP_Pool in the IP Pool control.

5.

Under the Add Route tab, select all-nets in the Allowed Networks control.

6.

Click OK

Use User Authentication Rules is enabled as default. To be able to authenticate users using the
PPTP tunnel, it is necessary to configure NetDefendOS

Authentication Rules

but that is not

covered in this example.

Example 9.14. Setting up an L2TP Tunnel Over IPsec

This example shows how to set up a fully working L2TP Tunnel based on IPsec encryption and
will cover many parts of basic VPN configuration.

Before starting, it is necessary to configure some address objects, for example the network that is
going to be assigned to the L2TP clients. Proposal lists and PSK are needed as well. Here we will
use the objects created in previous examples.

To be able to authenticate the users using the L2TP tunnel a local user database will be used.

A. Start by preparing a new Local User Database:

Command-Line Interface

gw-world:/> add LocalUserDatabase UserDB

gw-world:/> cc LocalUserDatabase UserDB

gw-world:/UserDB> add User testuser Password=mypassword

Web Interface

1.

Go to: Policies > User Authentication Local User Databases > Add > Local User
Database

2.

Enter a suitable name for the user database, for example

UserDB

3.

Go to: Policies > User Authentication Local User Databases > UserDB > Add > User

4.

Now enter:

•

Username: testuser

•

Password: mypassword

•

Confirm Password: mypassword

5.

Click OK

Chapter 9: VPN

732

«
...
730
731
732
733
734
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Fortinet Pages: 62

Brand: Genetec Pages: 16

Proventia Network GX4004

Brand: IBM Pages: 3

Brand: Fortinet Pages: 2

Brand: Fortinet Pages: 388

Brand: 3Com Pages: 182

Brand: Tosibox Pages: 44

Brand: NETASQ Pages: 63

CAR-5040 Series

Brand: Caswell Pages: 134

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands