manualshive.com logo in svg

D-Link NetDefendOS, User Manual

D-Link NetDefendOS, a comprehensive network security solution, offers robust protection for your business. Seamlessly integrating hardware and software, it ensures superior defense against cyber threats. Enhance your experience with our free User Manuals, available for download at manualshive.com, offering detailed instructions and insights to optimize your network security settings.

Share
Download
background image

ii.

Inner IP Address - Set this to any IPv4 address within the network used for the

Local

Network

property. As a convention, it is recommended to use the IPv4 address of the

physical interface connected to the protected network.

iii.

Outer Interface Filter - Set this to be the listening interface for L2TPv3 client
connections. Without IPsec, this is set to a physical Ethernet interface. When using IPsec
for encryption, this is set to the IPsec tunnel object.

iv.

Server IP - Set this to be the IP address of the listening interface.

B. Enable transparent mode for the protected interface.

Change the properties of the Ethernet interface connected to the protected network so that

Transparent Mode

is enabled.

C. Set any required

L2TPv3 Server

advanced options.

Some L2TPv3 clients may require the setting of the option

Host Name

or

Router ID

for the

server object. If the

Host Name

is set to

None

, the tunnel's

Inner IP Address

is used for this

setting.

The illustration below shows a typical setup for L2TPv3 where the protected network on
interface

If3

can be accessed by L2TPv3 clients connecting to the L2TPv3 server listening on the

interface

If2

.

Figure 9.4. An L2TPv3 Example

Setting up the above scenario is covered in the example below.

Chapter 9: VPN

742

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

PaloAlto Networks PA-220 Quick Start Manual preview
PA-220
Brand: PaloAlto Networks Pages: 2
SonicWALL SuperMassive 9800 AC Installation Manual preview
SuperMassive 9800 AC
Brand: SonicWALL Pages: 2
SonicWALL SOHO Wireless Quick Start Manual preview
SOHO Wireless
Brand: SonicWALL Pages: 2
SonicWALL SMA 7210 Replacement And Installation preview
SMA 7210
Brand: SonicWALL Pages: 2
SonicWALL SSL-IA Hardware Manual preview
SSL-IA
Brand: SonicWALL Pages: 4
SonicWALL Secure Mobile Access 6210 Installation Manual preview
Secure Mobile Access 6210
Brand: SonicWALL Pages: 2
SonicWALL NSa 6700 Quick Start Manual preview
NSa 6700
Brand: SonicWALL Pages: 2
SonicWALL NSa 2700 Quick Start Manual preview
NSa 2700
Brand: SonicWALL Pages: 2
SonicWALL TZ 100 / 200 Quick Start Manual preview
TZ 100 / 200
Brand: SonicWALL Pages: 9
SonicWALL TZ 150 Wireless Getting Started Manual preview
TZ 150 Wireless
Brand: SonicWALL Pages: 37
SonicWALL TZ 190 User Manual preview
TZ 190
Brand: SonicWALL Pages: 46
SonicWALL SuperMassive 9800 Getting Started Manual preview
SuperMassive 9800
Brand: SonicWALL Pages: 76
SonicWALL SonicOS Enhanced 2.2 Administrator'S Manual preview
SonicOS Enhanced 2.2
Brand: SonicWALL Pages: 190
Pulse Secure PSA3000 Hardware Manual preview
PSA3000
Brand: Pulse Secure Pages: 42
Pulse Secure PSA7000 Hardware Manual preview
PSA7000
Brand: Pulse Secure Pages: 52

Brands by name

Popular brands

Load more brands