D-Link NetDefendOS User Manual Download Page 88 | Manualshive

Page: 88 / 912

background image

•

Emergency

•

Alert

•

Critical

•

Error

•

Warning

•

Notice

•

Info

•

Debug

By default, NetDefendOS sends any generated messages of level Info and above to any
configured log servers but the level required for sending can be changed by the administrator.
The Debug severity is intended for system troubleshooting only and is not normally used. All
individual log messages with their meaning are described in the separate

NetDefendOS

Log

Reference Guide.

Event Message Timestamping

When log messages are generated by NetDefendOS for sending to an external log server, they
are always timestamped with the time expressed as

UTC/GMT

(Greenwich Mean Time). This

makes it possible to compare events from different firewalls in different time zones which are set
with different system times.

The exception to this is log messages which are displayed using the local

Memlog

feature. These

are always timestamped with the current, local system time.

2.3.3. Log Receiver Types

The event messages generated by NetDefendOS can be sent to various types of log receivers. To
receive messages, it is necessary to configure in NetDefendOS one or more event receivers
objects that specify

what

events to capture, and

where

to send them.

NetDefendOS can distribute event messages to different types of receivers and these are
enabled by creating any of the following types of

Log Receiver

objects.

•

Memory Log Receiver

NetDefendOS has its own logging mechanism also known as the

MemLog

. This retains all

event log messages in memory and allows direct viewing of recent log messages through the
Web Interface.

This is enabled by default but can be disabled.

This receiver type is discussed further below in

Section 2.3.4, “The Memory Log Receiver

•

Syslog Receiver

Syslog

is the de-facto log message standard for logging events from network devices. If other

network devices are already logging to Syslog servers, using Syslog for NetDefendOS log
messages can simplify overall administration.

This receiver type is discussed further below in

Section 2.3.5, “The Syslog Log Receiver”

.

•

Mail Alerting

The

Mail Altering function

allows a number of log messages to be grouped together into a

single email which is then sent to a given email address via a designated SMTP server.

Chapter 2: Management and Maintenance

88

«
...
86
87
88
89
90
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: ZyXEL Communications Pages: 2

Brand: ZyXEL Communications Pages: 8

Brand: ZyXEL Communications Pages: 2

Brand: ZyXEL Communications Pages: 394

FortiDDoS 1000B

Brand: Fortinet Pages: 44

Brand: Watchguard Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands