manualshive.com logo in svg

D-Link NetDefendOS, User Manual

D-Link NetDefendOS, a comprehensive network security solution, offers robust protection for your business. Seamlessly integrating hardware and software, it ensures superior defense against cyber threats. Enhance your experience with our free User Manuals, available for download at manualshive.com, offering detailed instructions and insights to optimize your network security settings.

Share
Download
background image

Multicast TTL on Low

What action to take on too low multicast TTL values.

Default:

DropLog

Default TTL

Indicates which TTL NetDefendOS is to use when originating a packet. These values are usually
between 64 and 255.

Default:

255

Layer Size Consistency

Verifies that the size information contained in each "layer" (Ethernet, IP, TCP, UDP, ICMP) is
consistent with that of other layers.

Default:

ValidateLogBad

SecuRemoteUDP Compatibility

Allow IP data to contain eight bytes more than the UDP total length field specifies. Checkpoint
SecuRemote violates NAT-T drafts.

Default:

Disabled

IP Option Sizes

Verifies the size of "IP options". These options are small blocks of information that may be added
to the end of each IP header. This function checks the size of well-known option types and
ensures that no option exceeds the size limit stipulated by the IP header itself.

Default:

ValidateLogBad

IP Option Source/Return

Indicates whether source routing options are to be permitted. These options allow the sender of
the packet to control how the packet is to be routed through each router and firewall. These
constitute an enormous security risk. NetDefendOS never obeys the source routes specified by
these options, regardless of this setting.

Default:

DropLog

IP Options Timestamps

Time stamp options instruct each router and firewall on the packet's route to indicate at what
time the packet was forwarded along the route. These options do not occur in normal traffic.
Time stamps may also be used to "record" the route a packet has taken from sender to final
destination. NetDefendOS never enters information into these options, regardless of this setting.

Default:

DropLog

Chapter 13: Advanced Settings

851

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

H3C SecPath F5000-AK Series Command Reference Manual preview
SecPath F5000-AK Series
Brand: H3C Pages: 39
Forcepoint NGFW Quick Start Manual preview
NGFW
Brand: Forcepoint Pages: 12
NETGEAR ProSafe FVS318v3 Reference Manual preview
ProSafe FVS318v3
Brand: NETGEAR Pages: 20
Arista DCA-NDR-A5 Quick Start Manual preview
DCA-NDR-A5
Brand: Arista Pages: 34
Fortinet FortiGate 60M Installation Manual preview
FortiGate 60M
Brand: Fortinet Pages: 64
Mackie D.2 Specifications preview
D.2
Brand: Mackie Pages: 2
Global Technology GB-750 Product Manual preview
GB-750
Brand: Global Technology Pages: 28
Ruijie RG-WALL1600-M6600 Hardware Installation And Reference Manual preview
RG-WALL1600-M6600
Brand: Ruijie Pages: 26
Ruijie RG-WALL1600-X9300 Hardware Installation And Reference Manual preview
RG-WALL1600-X9300
Brand: Ruijie Pages: 27

Brands by name

Popular brands

Load more brands