D-Link NetDefendOS User Manual Download Page 660 | Manualshive

Page: 660 / 912

background image

Parameters included in START messages sent by NetDefendOS are:

•

Type - Marks this AccountingRequest as signaling the beginning of the service (START).

•

ID - A unique random 7 character string identifier to enable matching of an
AccountingRequest with Acct-Status-Type set to STOP.

•

User Name - The user name of the authenticated user.

•

NAS IP Address - The IP address of the NetDefend Firewall.

•

NAS Port - The port of the NAS on which the user was authenticated (this is a physical
interface and not a TCP or UDP port).

•

User IP Address - The IP address of the authenticated user. This is sent only if specified on
the authentication server.

•

How Authenticated - How the user was authenticated. This is set to either

RADIUS

if the user

was authenticated via RADIUS, or

LOCAL

if the user was authenticated via a local user

database.

•

Delay Time - The time delay (in seconds) since the AccountingRequest packet was sent and
the authentication acknowledgment was received. This can be subtracted from the time of
arrival on the server to find the approximate time of the event generating this
AccountingRequest. Note that this does not reflect network delays. The first attempt will have
this parameter set to 0.

•

Timestamp - The number of seconds since 1st January, 1970. Used to set a timestamp when
this packet was sent from NetDefendOS.

STOP Message Parameters

Parameters included in STOP messages sent by NetDefendOS are:

•

Type - Marks this accounting request as signaling the end of a session (STOP).

•

ID - An identifier matching a previously sent AccountingRequest packet, with
Acct-Status-Type set to START.

•

User Name - The user name of the authenticated user.

•

NAS IP Address - The IP address of the NetDefend Firewall.

•

NAS Port - The port on the NAS on which the user was authenticated. (This is a physical
interface and not a TCP or UDP port).

•

User IP Address - The IP address of the authenticated user. This is sent only if specified on
the authentication server.

•

Input Bytes - The number of bytes received by the user. (*)

•

Output Bytes - The number of bytes sent by the user. (*)

•

Input Packets - The number of packets received by the user. (*)

•

Output Packets - The number of packets sent by the user. (*)

•

Session Time - The number of seconds this session lasted. (*)

•

Termination Cause - The reason why the session was terminated.

Chapter 8: User Authentication

660

«
...
658
659
660
661
662
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Watchguard Pages: 2

Photosmart 7500

Brand: HP Pages: 84

NetDefend DFL-1600

Brand: D-Link Pages: 9

SECPATH U200-CS

Brand: 3Com Pages: 130

Brand: GajShield Pages: 8

Brand: Watchguard Pages: 8

Brand: Genetec Pages: 22

MAESTRO R80.20SP

Brand: Check Point Pages: 228

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands