D-Link NetDefendOS User Manual Download Page 264 | Manualshive

Page: 264 / 912

background image

Risk Guidelines

The following are guidelines for how the risk parameter for each application control signature
should be viewed by the administrator:

•

Risk Level 5

Very high risk. This traffic should be blocked unless special circumstances or requirements
exist. For example, PHP-, CGI-, HTTPS-proxies; known attack sites.

•

Risk Level 4

High risk. This traffic should be reviewed and a block or allow action taken. Site-to-site
tunneling should be used where possible. For example, SSH, LDAP, RADIUS, Dropbox and
similar.

•

Risk Level 3

Medium risk. Signatures with this risk level can affect network security, bandwidth usage and
company integrity if care is not taken. For example, Facebook and other social networks,
Google Analytics and similar aggregators, P2P/filesharing

•

Risk Level 2

Moderate risk. Signatures with this risk level can affect network security and/or affect
bandwidth usage. For example, video streaming sites, Java/Flash game sites

•

Risk Level 1

Low-risk. Signatures that could be candidates for blocking. Typically not a threat. For
example, E-commerce sites, news portals.

Application Control Subscription Expiry

As mentioned previously, application control requires a subscription to be purchased for the
feature to function.

If the subscription expires, the following will happen if application control has been configured
on any

IP Policy

objects:

•

A console message is generated at system startup or on reconfiguration to indicate
subscription expiry.

•

Application control will continue to function so that traffic continues to flow through
NetDefendOS but, whenever it triggers, the data type will be set to

Unknown

.

For example, if the administrator had configured

BitTorrent

traffic to be dropped, it will no

longer be dropped because it has been recognized and then reclassified as

Unknown

traffic.

•

Whenever application control triggers, the log message

application_identified

will be

generated as usual but the traffic type will be marked as

Unknown

. Similarly, the type

Unknown

will also appear in the

application_end

log message.

•

In addition, the log message

application_control_disabled

will also be generated when

application control triggers.

The current status of the application control subscription can be viewed with the Web Interface
by going to Status > Maintenance > License.

Chapter 3: Fundamentals

264

«
...
262
263
264
265
266
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Lanner Pages: 45

Brand: Arista Pages: 34

Brand: Solida systems Pages: 49

Brand: Watchguard Pages: 2

Brand: Watchguard Pages: 8

Brand: Watchguard Pages: 2

Firebox 2500 Series

Brand: Watchguard Pages: 30

Brand: Watchguard Pages: 18

Brand: Watchguard Pages: 37

Brand: Watchguard Pages: 29

Firebox Vclass V100

Brand: Watchguard Pages: 38

Brand: Watchguard Pages: 208

Brand: Dell Pages: 8

Brand: tufin Pages: 22

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands