D-Link NetDefendOS User Manual Download | Manualshive

Page: 103 / 912

background image

2.4. Monitoring

The real-time performance of NetDefendOS can be monitored in a number of ways. They are:

•

NetDefendOS real-time monitor alerts.

•

The NetDefendOS link monitor.

•

Monitoring through an SNMP client.

•

Hardware monitoring for specific hardware models.

2.4.1. Real-time Monitor Alerts

A number of NetDefendOS statistical values can graphically monitored through the

Real-time

Monitoring

feature.

Real-time Monitor Alert

thresholds can be specified in NetDefendOS for any of

these monitored values so that they can have a maximum and/or a minimum numerical
threshold.

Should a specified maximum or minimum threshold be crossed, NetDefendOS will automatically
generate a log message which will be sent to all configured log receivers. All such log messages
belong to the REALTIMEMONITOR message category which has the identity number 54.

The log message identity will therefore take the form 054XXXXX where XXXXX represents the
position of the statistic generating the event in the list of alert rules. A log message with identity
05400003, for example, identifies the third rule in the rule list.

Monitor Alert Rules

Each

Monitor Alert Rule

consists of the following fields:

Name

User assigned name for the rule.

Sample time

The interval in seconds between checking the statistic.

Low threshold

The lower threshold (if specified).

High threshold

A higher threshold (if specified).

Continuous

This determines if an event is also generated when the threshold is
crossed in the other direction. In other words, the statistic moves back to
within acceptable limits. This field can be Yes or No.

Backoff

The minimum number of seconds between consecutive

Monitor Threshold

Rule

log messages. This value can be useful in preventing a flood of log

messages when a statistic is repeatedly passing a threshold and then
receding from it again.

2.4.2. The Link Monitor

Overview

The

Link Monitor

is a NetDefendOS feature that allows monitoring of the connectivity to one or

more IP addresses external to the NetDefend Firewall. This monitoring is done using standard

Chapter 2: Management and Maintenance

103

«
...
101
102
103
104
105
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Global Technology Associates Pages: 28

Brand: PaloAlto Networks Pages: 20

Brand: Barracuda Pages: 2

Brand: ADTRAN Pages: 38

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands