D-Link NetDefendOS User Manual Download | Manualshive

Page: 124 / 912

background image

v.

A number or name indicating the protocol being used. The

State

column will have the

value

RAW IP

.

•

Source

This consists of:

i.

The source interface. This could be the name of any type of NetDefendOS interface
object such as a VLAN or IPsec tunnel. It can also be

Core

which indicates NetDefendOS

itself is the connection's source.

ii.

The source IP address for the connection.

iii.

The source port number for the connection.

•

Destination

This consists of:

i.

The destination interface. This could be the name of any type of NetDefendOS interface
object such as a VLAN or IPsec tunnel. It can also be

Core

which indicates NetDefendOS

itself is the connection's destination.

ii.

The destination IP address for the connection.

iii.

The destination port number for the connection.

•

Tmout

The number of seconds until the connection times out because no traffic is detected. As soon
as any traffic is detected being sent from either end of the connection, this value is reset to
the default timeout. The defaults are controlled by the followed NetDefendOS settings:

i.

TCP Idle Lifetime - For TCP connections. The default value is 262144 seconds.

ii.

UDP Idle Lifetime - For UDP connections. The default value is 130 seconds.

iii.

Ping Idle Lifetime - For ICMP Ping connections. The default value is 8 seconds.

iv.

Other Protocols Idle Lifetime - All other protocols. The default value is 130 seconds.

Filtering Connections

The

connections

command provides the ability to specify filters for which connections are

display. To display only connections with the protocol

TCP

the command would be:

gw-world:/> conn -protocol=TCP

To see only connections with the source interface

If3

:

gw-world:/> conn -srciface=If3

Closing Connections

The

connections

command gives the administrator the ability to close all or selected connections.

To close all, the command would be:

gw-world:/> conn -close -all

Chapter 2: Management and Maintenance

124

«
...
122
123
124
125
126
...
»

Summary of Contents for NetDefendOS

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NetDefendOS

Brand: Brocade Communications Systems Pages: 106

Brand: Atlante Informatica Pages: 4

Brand: Fortinet Pages: 64

SURFboard SVG2500

Brand: Motorola Pages: 32

Brand: Dell Pages: 8

Brand: NetScreen Technologies Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands